News result Sideshift
JCB 3CX Sideshift Problems: Creeping, Sticking and Worn Wear...
Why a JCB 3CX backhoe carriage creeps while digging, sticks or knocks, what to check in which order, and which JCB service manual (by serial number) has the procedures.
SUBHEADING
Blog posts
JCB Loadall Boom Drifting Down: Causes and Checks
A JCB Loadall boom that creeps down or a telescopic section that slides in under load is losing oil through one of three paths. This guide explains how to tell which one, how to test safely, and which service manual covers your machine.
0 comments
JCB 3CX No Drive or Slipping Transmission: What to Check First
A JCB 3CX that will not drive, drives in one direction only or slips under load usually has a simple cause. This guide gives the order of checks, from fluid level and switches to pressure and stall tests, and shows where each procedure is in the service manual.
0 comments
Carraro Axle Identification: How to Find the Right Parts Catalog
Carraro axles are identified by type (for example 26.16) and a 6-digit drawing reference. This guide shows where to find both, how to read a Carraro spare parts list, and how to find the matching catalog among 534 PDFs.
0 comments
Which JCB 3CX Service Manual Do You Need? A Serial Number Guide
JCB has published at least 11 service manuals for the 3CX family. This guide shows how to read your serial plate and match it to the right publication: 9803/3260, 3270, 3280, 3290 or the newer 9813 editions.
0 comments